KH-55

Product Features

01.	Bed, column and spindle head are symmetrical design.
02.	Ball screw and guide rail using grease lubrication, automatic lubrication system oil consumption economic and environmental protection.
03.	KIWA can provide automatic hydraulic or pneumatic fixture systems and flexible manipulators.
04.	KIWA provides tool management functions, including tool offset and tool life, as standard.

KH-55 Spec

Specification		KH55
TRAVEL	X/Y/Z axis	800/800/800 mm
	Spindle center to pallet surface	100-900 mm
	Spindle nose to pallet center	100-900 mm
	Pallet top height (from the floor)	1,050 mm
SPINDLE	Spindle taper	7/24 Taper No. 50
	Spindle speed	10,000min-1(OP.6,000min-1)
	Spindle motor power	35KW
TABLE	Table size	500 x 500 mm
	Max. load	750kg
	Configuration	25-M16 P=100mm(OP.630mm P=125mm）
	Max.workpiece diameter	φ900x1,000mm
AUTOMATIC TOOL CHANGER	Tool Change system	Fixed tool holder
	Type of tool shank	BT50
	Numbei of tools	40T(OP.60/120T)
	Max.tool dia.(Adjacent pot full/empty)	φ125mm/φ250mm
	Max. tool length	500mm
	Max. tool weight	20kg
FEED	ATC time (T-T/C-C)	1.8/3.8
	Rapid feed(X/Y/Z axis)	62,000mm/min
	Cutting feed(X/Y/Z axis)	30,000mm/min
	Acceleration (X/Y/Z axis)	0.72/0.6/0.72 G
SIZE	Floor space(w/o chip conveyor)	5,683 x 3,006 mm
	Weight	14,000kg
Control system		FANUC 31i-A