KH-5800kai

Product Features

01.	The largest workpiece size of the same grade (#40 taper), and the smallest floor area.
02.	Can withstand large and heavy cutting tools, the number of tools (40T/60T/120T/240T). Expandable number of APCS (2-6) and FMS units.
03.	Machine standard: 12,000min-1 high torque spindle (249Nm), high speed CAM ball turntable system (66.6min-1), 80m/min-1 fast speed, 1G acceleration.
04.	The unit is also equipped with thermostatic systems for spindle and lead screw for high speed operation.

KH-5800kai Spec

Specification		KH-5800kai
TRAVEL	X/Y/Z axis	800/800/850 mm
	Spindle center to pallet surface	50-850 mm
	Spindle nose to pallet center	75-925 mm
	Pallet top height (from the floor)	1,069 mm
SPINDLE	Spindle taper	7/24 Taper NT No.40
	Spindle speed	12,000min-1 Direct drive (Op. 15,000min-1 Direct drive /20,000min-1 Built-in)
	Spindle motor power	37/15KW
TABLE	Table size	500 x 500 mm(OP.400 x 400 / 630 x630 mm)
	Max.workpiece diameter	φ800x1,000mm
	Configuration	25-M16 P=100mm500mm (OP.25-M16 P=80mm 400mm) (OP.25-M16 P=125mm 630mm )
	Number of pallets	2（OP.6/8）
	Max. load	500kg
	Min.indexing degree	0.001°
	Pallet change system	rotation
AUTOMATIC TOOL CHANGER	Tool Change system	Random for 40/60ATC,Fixed tool holder )
	Type of tool shank	MAS BT40
	Numbei of tools	40T(OP.60/120/240T)
	Max.tool dia.(Adjacent pot full/empty)	φ70mm/φ140mm -40/60ATC (OP.φ95mm/φ185mm-120/240ATC)
	Max. tool length	550mm
	Max. tool weight	8kg(OP.12kg)
	ATC time (T-T/C-C)	1.1/2.7 sec
FEED	Rapid feed(X/Y/Z axis)	80,000mm/min
	Cutting feed(X/Y/Z axis)	30,000mm/min
	Table rotation speed	66.6min-1(OP.55.5 Max. Bearing capacity 750kg/ tray)
	Acceleration (X/Y/Z axis)	1.0/1.0/1.0 G
SIZE	Floor space(w/o chip conveyor)	2,896 x 5,058 mm（2APC+40/60ATC) 3,128 x5,058 mm（2APC+120/240ATC)
	Weight	9,650kg(40ATC)/10,400kg(120ATC)
Control system		FANUC 31i-B Plus