KCW-11V

Product Features

01.	ATC tool magazine can accommodate maximum capacity φ 245mm cutting tool (without cutting tools on both sides).
02.	The powerful spindle and wide table (1200x550mm) are supported by sturdy columns and bed, with an X-axis stroke of 1100mm, suitable for processing longer workpieces.
03.	The tool magazine is separated from the processing area, and the tools inside the magazine will not adhere to chips.
04.	The spindle head is equipped with a cooling system to effectively control thermal displacement.
05.	The user-friendly operation panel can be rotated to 120 degrees. Switches and buttons are distinguished by function and reasonably distributed on the operation panel to improve work efficiency.

KCW-11V Spec

Specification		KCW-11V
TRAVEL	X/Y/Z axis	1,100/550/510 mm
	Spindle center to pallet surface	140-650 mm
	Spindle nose to pallet center	585 mm
	Pallet top height (from the floor)	970 mm
SPINDLE	Spindle taper	7/24 Taper NT No.50
	Spindle speed	6,000min-1（OP.10,000min-1)
	Spindle motor power	11/15KW
TABLE	Table size	1,200 x 550 mm
	Configuration	5-18mm, spacing 100mmT-type groove
	Max. load	800kg
AUTOMATIC TOOL CHANGER	Tool Change system	Manipulator tool changing
	Type of tool shank	MAS BT50
	Numbei of tools	24T(OP.30T)
	Max.tool dia.(Adjacent pot full/empty)	φ120mm/φ245mm
	Max. tool length	350mm
	Max. tool weight	20kg
	ATC time (T-T/C-C)	2.5/4.5 sec
FEED	Rapid feed(X/Y/Z axis)	X/Y:48,000 Z:36,000mm/min
	Cutting feed(X/Y/Z axis)	30,000mm/min
SIZE	Floor space(w/o chip conveyor)	2,900 x 3,020 mm
	Weight	9,000kg
Control system		FANUC 0i-MF Plus